• Wed. Jun 19th, 2024

Meghalaya Divangjan beneficiaries aided with digital designing and 3D printing technology for customized prosthesis and orthosis under aegis of NEC

The North Eastern Council (NEC), along with Composite Regional Centre (CRC), Shillong selected two Divyangjan beneficiaries from Meghalaya to provide them with the Custom 3D Scanner Printed Prosthetics.

The beneficiaries had cases of leg amputation and were sent to the National Institute for Empowerment of Persons with Multiple Disabilities (NIEPMD), Chennai under Ministry of Social Justice and Empowerment for the process of fitting the Customized 3D Scanner Printing Prosthetics.

Based on the digital scanning carried out by Assam Electronic Development Corporation Limited (AMTRON) the data was provided to NIEPMD, Chennai for detailed designing of the sockets (includes expert involvement for pressure point markings, weight discharge etc,) for final approved digital design.

Thereafter the sockets for the patients were printed using 3D Scanner Printing Technology. A 3D Scanner Printed prosthetic generally involves 3D Printing of the prosthetic socket and rest of the prosthetic parts like Pylon and Feet are manufactured traditionally. Only the 3D printed socket is fitted into the Pylon as per the image below.

On 5th Sept 2022, both the Amputees were fitted with the customized 3D Printed socket prosthesis and the beneficiaries were amazed to see that the device fitted excellently besides the highly enhanced comfort and much better walk.

This initiative has opened a whole new world for the ones suffering from temporary disability and trauma cases. The solution demonstrated enables capturing & generating accurate digital data regarding the geometry or shape of patients stump without the need for them to undertake repeated visits to assessment centres. This shall not only reduce Out of Pocket Expenses for Divyangjans but the digital repository so created can be used for both trend analysis as well as improving the quality of Continuous Medical Education for Prosthetist or Orthotist as well as other stakeholders.

The prosthesis/orthosis/ assistive devices can be provided having custom fit within much shorter time.

The 3D scanner printing and other related technologies are expected to aid in meeting challenges of healthcare needs with speed, precision and remarkable enhanced solutions not witnessed so far. Hereafter, NEC intends to engage with the concerned Ministry, NER States and suitable Institutions like AMTRON to use the technology for covering persons with disabilities (Divyangjan) beneficiaries all across the North East Region.

Leave a Reply

Your email address will not be published. Required fields are marked *

WP Twitter Auto Publish Powered By : XYZScripts.com